Fasco Epoxies Steelflex Super Slick 2000 - Epoxy Bottom Coating - Quart Kit

Description

Contact Us
By ebay messages
STORE NEWSLETTER
Sign up to receive special insider notifications of deals, promotions, and new items!
SIGN UP
VIEW RATINGS
VISIT STORE
PRODUCT DESCRIPTION
Field tested on thousands of airboats in the Florida Everglades for over 37 years.
Super Slick is an Epoxy Coating unlike other competitor coatings.
Super Slick surface contains teflon plus additional friction reducing additive.
Same Steelflex toughness and durability proven on airboats since 1961.
Long life--Stays slippery as long as steelflex is on the boat
Can be rolled, brushed, or poured and spread.
Application and dry time same as regular steelflex.
Coverage: About 30 sq. ft. per quart
Go to our pigment page to customize the color of your super slick 2000
4oz of pigment per gallon Add pigment to part 2
COVERAGE
Approximately 120 sq. ft. per gallon and 30 sq. ft. per quart.
PREPARATION
The best preparation is to sandblast the airboat and then grind the metal surface with a 24-grit disc. Make the surface as rough as possible and wipe it clean with lacquer thinner or acetone.
For fiberglass, the rougher the better. Do not over rough the fiberglass or you may go too deep causing holes. Use your best judgment. Blow off fiberglass and if possible, wipe it down with acetone.
MIXING
1. Mix equal parts of #1 and #2 Steelflex 9X-2000. Thoroughly mix down from the sides and bottom of the container. Electric drill mixing does not mix the two parts together as well as hand mixing.
"
IT IS NOT HOW FAST YOU MIX BUT HOW THOROUGHLY YOU MIX IT
".
Mixing is the most important part of the application.
NOTE: IF USING A COLOR, REFER TO THE LAST PARAGRAPH BELOW.
APPLICATION
Immediately pour out the mixture over the entire bottom of the surface and spread evenly.
DO NOT USE BELOW 65°F.
DRY AND CURE TIME
DRY: Approximately 6 hours.
CURE: 48 hours.
COLORS
9X-2000 Neutral is formulated to add one of our standard #109 pigment colors. They are: black, grey, brown (reddish), beige, light blue, royal blue, emerald green, olive drab, yellow, red, orange, midnight blue
One quart requires 1 ounce of pigment and one gallon requires 4 ounces of pigment. Add the pigment to Part 2 to insure that the color will be the same every time. Be sure to mix the pigment in well and then mix Part 1 and Part 2 together.
ABOUT US
We are a family owned and operated business located in Fort Pierce, Florida. Our knowledge comes from years of hands-on experience in the fiberglass repair and manufacturing businesses. Let us put those years of hard work to your advantage!
At Fiberglass Supply Depot we have been selling high quality products for the last 25 years. Customer service and making sure you get the right products for the job is our number one goal. We are a family business with very high standards. Shop here at Fiberglass Supply Depot and we promise you won't be disappointed.
We stock: Fiberglass cloth, Fiberglass Mat, Fiberglass Biaxle, Polyester Resin, Epoxy Resin, Glues, Putties, Marine Paints, Sandpaper, detailing and buffing supplies - everything to get the job done, right!